Kiloview’s new AVX24-4 Media HUB and KiloLink Station address challenges between IT and AV operations, supporting workflows for IP media management and wireless bonding reception.
KiloLink Station
Kiloview’s new AVX24-4 Media HUB and KiloLink Station address common challenges between IT infrastructure and AV operations, and aim to support AV workflows involved in professional IP media management and wireless bonding reception. Studios, production centres and enterprise teams can use AVX24-4 Media HUB to visualise and control complex IP media workflows. KiloLink Station is a turnkey system for reliable, synchronised wireless bonding reception and centralised device management for on-site and remote production.
IP Media Workflow Management
Serving as the foundation of Kiloview’s AV-over-IP ecosystem, the AVX24-4 Media HUB media management platform focusses on NDI-based environments. Built into a compact 1U rack-mountable design, AVX24-4 integrates a high-performance network module, an FPGA-based processing engine and a centralised control system into a single device. Rather than acting as a traditional IT switch, AVX24-4 is pre-configured and optimised specifically for AV engineers looking for straightforward operation without needing deep networking expertise.
AVX24-4 users can manage their networks visually in real time, gaining visibility into device connections, port status, VLAN configuration, PoE usage and signal paths through an interactive topology view. Intelligent diagnostics continuously monitor network conditions, latency, packet loss and link health so that users can identify and isolate issues quickly at both global and end-to-end levels without interrupting live production.
For NDI workflows, AVX24-4 delivers multicast-based routing, enabling sub-frame switching, zero black-frame transitions and microsecond-level processing accuracy. Multicast transmissions are addressed to a group of destinations by replicating data packets from the incoming interface and sending the copies on the outgoing interfaces.
Built-in QoS policies are available to prioritise NDI streams in congested network environments, and support for PTP (IEEE 1588) results in precise time synchronisation for frame-accurate switching and multi-source alignment. Each AVX24-4 can handle up to 32 NDI sources at resolutions up to 4Kp60, with almost unlimited receivers depending on network bandwidth.
AVX24-4 Media HUB media management platform
Designed to scale, multiple AVX24-4 units can be interconnected via 10GbE SFP+ links and centrally managed through KiloLink Server software, which supports large-scale, cross-switch deployments with unified visibility, configuration and monitoring.
Combined Hardware Bonding Receiver & Device Management Platform
KiloLink Station is a compact, plug-and-play hardware platform made to simplify wireless bonding reception, remote contribution and centralised device management in one device.
KiloLink Station is preloaded with KiloLink Server Pro software, which means it doesn’t require separate servers, software installation, Docker configuration or subscriptions. Operators can connect Kiloview P-series wireless bonding encoders with minimal setup, fast onboarding and real-time monitoring. The software integrates bonding and centralized management visually through a single interface and is compatible with the mainstream browsers. Users can manage and view device status, configure parameters, access the device page, monitor bonding link status and streaming status, and upgrade firmware. All operations can be performed via the web interface.
KiloLink Station supports simultaneous reception from up to eight bonded contribution channels, with four synchronized 3G-SDI outputs (1080p60) and a 4K HDMI output for preview or multiview monitoring. Frame-level synchronization is set using embedded timecode, making it suitable for professional multi-camera productions.
Compatible with a wide range of protocols including NDI HX, SRT, RTMP, RTP/RTSP and HLS, KiloLink Station integrates into existing IP and broadcast workflows, serving as a bridge between field acquisition and centralized production. Through KiloLink Server Pro, KiloLink Station uses KiloLink’s bonding algorithm for stable multi-link bonding transmission. It combines various network links – 5G/4G cellular, Wi-Fi, Ethernet – applying automatic load balancing and dynamic bitrate adjustment to transmit data reliably in complex or weak, fluctuating network environments.
Kiloview at ISE 2026
Cradle Series RF02
Kiloview will show these new devices at ISE 2026 in Barcelona, 3-6 February, along with their Cradle Series RF02, a 2RU rack-mounted media platform that houses modular encoding, decoding, a media gateway card and software-ready computer card with wide expansion capabilities.
The FXC-A8800 Compute Card features functionality for audio/video mixing, switching, graphics processing and software-defined workflows that handle complex production tasks efficiently. Together with other expansion cards, the RF02 gives end-to-end AV workflow support, covering encoding, decoding, transcoding, multiviewing, routing and other tasks.
Judy Zuo, Vice President of Sales & Marketing at Kiloview, said, “By strengthening both the management layer and the network foundation, we are making professional AV-over-IP workflows more visual, controllable and reliable.“ With these new products, Kiloview further unifies connection, control, management and transmission into a cohesive AV-over-IP platform across broadcast, live events, enterprise, education and remote production environments. www.kiloview.com
